Introduction to Load Slinging and Truck Loader Crane

Theory and practical lessons will include the following:

• Demonstrate knowledge of using a truck loader crane.
• Demonstrate knowledge of the hazards associated with the operation of a truck loader crane.
• Demonstrate knowledge of operational requirements applicable to a truck loader crane.
• Demonstrate knowledge of the requirements for lock out and tag out processes for a truck loader crane.
• Demonstrate knowledge of truck loader crane equipment and attachments.
• Describe the functions of critical components and equipment using lifting equipment terminology.
• Describe procedures for the care and use of the lifting equipment & controlling loads.
• Confirm any person directing lifts and the communication methods to be used/Explain lift planning in relation to the people actively involved in the lift, and people in the area of operations.
• Assess load to determine whether it is within the lifting capacity of the crane.
• Position and level truck.
• Check and set up truck loader crane in preparation for slinging load.
• Select and check lifting equipment, and sling load/describe lifting equipment in relation to their type, purpose and use.
• Check load to be free of attachments and restraints while maintaining load stability.
• Assess the lift, the load, equipment, and truck to ensure they are stable for the entire load lifting and placing operation.
• Lift, move, and unload or place regular loads using a truck loader crane.
• Operate truck loader crane in response to recognised crane hand signals.
• Position, stow, and secure truck loader crane.
• Record and take action for any defects in crane and equipment.
• Carry out daily and weekly crane checks and maintenance.

It is recommended that learners have at least three months experience working in a crane workplace before attending the course. Learners may attend the course without this experience, but may be required to work for three months in a crane workplace before being awarded the unit standard.

A maintenance log (daily and weekly checks) is required to be kept for a minimum period of 3 months.

Minimum: 5

Maximum: 6