Submit a request for listing
DRAG
play_arrow
close
Show Filters

Courses

Location

If you employ apprentices, take 15% off with code SERIOUSMAHI. More info and t's and c's here.
phone 0800 72 33 848 phone (64) 7 579 5969 email info@vhnz.co.nz
search
book now book now Upcoming Courses
CRA014
arrow_back

Mobile Crane

Duration 2 days
Price P.O.A
Unit Standard 3795

General
Info

Purpose

People credited with this unit standard are able to: configure and position a mobile crane; lift and place regular loads; and prepare mobile crane for road travel mode, and complete documentation.

NOTE: The assessment must be carried out in a crane workplace or equivalent.

Cranes that can be used for assessment against this unit standard include – truck mounted cranes, all terrain cranes, rough terrain cranes. Assessment cannot be carried out using truck loader cranes, or telehandlers, or excavators when being used as cranes.

Course Objectives

At the successful completion of the course the trainee will be able to:

  • Configure and position a mobile crane.
  • Lift and place regular loads.
  • Prepare mobile crane for road travel mode, and complete documentation.

Entry Criteria

It is recommended that learners have at least three months experience working in a crane workplace before attending the course. Learners may attend the course without this experience, but will be required to work for three months in a crane workplace before being awarded the unit standard.

Pre-Requisite

3795:
US 3789 - Sling varied regular loads and safely direct a crane during crane operations

VHNZ can provide training for US 3789. To organise, please contact a VHNZ representative.

Special Note

To complete this Unit Standard evidence is required of a minimum of 40 verified lifts (slinging and directing of load) with at least 6 variations of lifting operations (site, crane, loads, and communications methods). At least two irregular loads, including one in which centre of gravity is offset, must be observed by the assessor.

Attendance Numbers

Minimum: 4

Maximum: 6

Unit standards

3795
Configure and position a mobile crane and lift and place regular loads

For more information visit our FAQs and Important Information.

Book a Course

arrow_drop_down
  • In-house company booking
  • Public courses
arrow_drop_down
arrow_drop_down
  • VHNZ Whangārei Training Centre
  • VHNZ Albany Training Centre
  • VHNZ East Tāmaki Training Centre
  • VHNZ Papakura Training Centre
  • VHNZ Hamilton Training Centre
  • VHNZ Tauranga Training Centre
  • VHNZ Rotorua Training Centre
  • VHNZ Whakatāne Training Centre
  • VHNZ New Plymouth Training Centre
  • VHNZ Hastings Training Centre
  • VHNZ Palmerston North Training Centre
  • VHNZ Upper Hutt Training Centre
  • VHNZ Lower Hutt Training Centre
  • VHNZ Nelson Training Centre
  • VHNZ Christchurch Training Centre
  • VHNZ Cromwell Training Centre
  • VHNZ Invercargill Training Centre
arrow_drop_down
date_range
    Total
    0.00 ex GST

    Would like to speak to our customer services team? Contact Us or call us at 0800 72 33 848

    Available dates

    close
    Date
    Number of attendees
    • spaces available $
      removeadd
    Confirm Confirm
    Book Course